Festo CPX-FB32 Manual page 110

B. Ethernet/IP Objects of the CPX-FB32
Obj. Instances
(= Module no. + 1)
133 1 ... 48
105 1 ... 48
107 1 ... 48
103 1 ... 48
B-12
Instance 100: Output
Within the Instance Output in the Assembly Object all outputs
of the CPX system will be transmitted over the network by
means of one communication connection.
The following sequence applies during transmission:
Sequence of transmission
1. I/O diagnostic interface/status byte, if active
(16-bit orientated)
2. Object instances of the analogue channels (16-bit orientated)
3. Instances of the technology modules (16 or 8-bit orientated)
4. Object instances of the digital outputs (8-bit orientated)
Instance 100 (Output) possesses the following member list in
the operating mode Remote I/O:
Attributes Entries in member list
(channel)
0/1 I/O diagnostic interface data,
if active
1 ... 32 Analogue channel data
1 ... 64 / Technology module
65 ... 96
1 ... 64 Digital Data
Instance 102: Configuration
Instance 102 (Configuration) possesses the following
member list:
Obj. Number of
199 1
Entries in member list
Configuration Array data
Festo P.BE-CPX-FB32-EN en 1111a
Type
WORD
WORD
BYTE/
WORD
BOOL
Type
ARRAY