1. Installation
Festo P.BE-CPX-FB32-EN en 1111a
Network setting stored in the CPX-FB32 and setting with DIL
switches
Analogously to the section "Fixed addressing via DIL
switches", the last octet of the IP address is set with the DIL
switch 3.
But the first 3 octets are not necessarily "192.168.1",
but can be freely selected via the IP address parameter.
The settings can be changed with the Handheld (CPX-MMI) or
via the CPX Festo Maintenance Tool (CPX-FMT).
This addressing option is available to you from Revision 18.
1-17