Festo CPX-FB32 Manual page 56

2. Commissioning
2-22
Entering station properties manually
When an EDS file is installed, the following information about
the EtherNet/IP station is added to the EDS library.
This information can also be entered manually if the CPX
terminal is to be operated with the parameter settings preset
at the factory.
Information
Vendor name
Vendor ID
Device type
Product code (depends on
operating mode)
– Remote I/O
– Remote Controller
Major Revision
Input size / output size
Product name
Catalogue number
Extended Ethernet/IP station features
Request Packet Interval (RPI)
Connections:
– Total of all connections
– Exclusive Owner
– Input only
– Listen only
1)
From CPX-FB32 Revision 17
Tab. 2/13: Station features
Description
Festo Corporation
26 1A
D H
12 C
D H
13002 32CA
D H
13003 32CB
D H
1)
2
Depends on CPX equipment
CPX-FB32
541302
≥ 10 ms
Max. 32
Max. 1
Max. 32
Max. 31 (There has to be
simultaneously at least 1
Excl.Owner or input only
connection)
Festo P.BE-CPX-FB32-EN en 1111a