Festo CPX-FB32 Manual page 119

B. Ethernet/IP Objects of the CPX-FB32
Attr. Access Designation
No.
10 Get Error number
11 Get Subsequent
channels
1)
d (diagnostic event) = 0 ... 39; most current diagnostic event = 0;
2)
Measured from the time the power supply was switched on
3)
If the error number = 0, the content is also 0. If the error number is between 128 ... 199
(error class 3), the content is not relevant (service case).
Festo P.BE-CPX-FB32-EN en 1111a
Description
Possible error messages see
System Manual chapter 5
Number of subsequent
3)
channels with the same error
Type Function no.
3488 + n
BYTE n = 10 * d + 8
BYTE n = 10 * d + 9
1)
B-21