Festo CPX-FB32 Manual page 115

B. Ethernet/IP Objects of the CPX-FB32
Attr. Access Description
No.
2 Get Fail safe
Specifies whether Fail Safe is active or
inactive.
0: inactive
1: active
System Idle mode
Specifies whether Idle mode is active or
inactive.
0: inactive
1: active
3 Get Monitoring CPX terminal (bit 0 ... 7)
Specifies whether the monitoring of short
circuit/overload and undervoltage is active or
inactive.
Bit 0:
Bit 1:
Bit 2:
Bit 3:
Bit 4:
Bits 5 ... 7: reserved
0: inactive
1: active
4 Get Number of input bytes (Rx size)
Specifies the number of input bytes of the CPX
terminal.
5 Get Number of output bytes (Tx size)
Specifies the number of output bytes of the
CPX terminal.
Festo P.BE-CPX-FB32-EN en 1111a
Monitoring SCS (short circuit/
overload sensor supply)
Monitoring SCO (short circuit/
overload outputs)
Monitoring V
Out
(Undervoltage outputs)
Monitoring V
Val
(Undervoltage valves)
Monitoring SCV
(short circuit valves)
Type Function no.
BYTE 1 (bit 0, 1)
1 (bit 2, 3)
BYTE 2 (bit 0 ... 7)
BYTE -
BYTE -
B-17