Configuration Array Object; Slave Size Object (For Operating Mode Remote Controller - Festo CPX-FB32 Manual

B. Ethernet/IP Objects of the CPX-FB32
B.4.9 Configuration Array Object
Attr. Access Description
No.
1 Get/Set Data field with all system and module parameters.
B.4.10 Slave Size Object (for operating mode Remote Controller)
Attr. Access Description
No.
1 Get Number of input bytes for the operating mode Remote Controller
2 Get Number of output bytes for the operating mode Remote Controller
Festo P.BE-CPX-FB32-EN en 1111a
The Configuration Array Object is available only for revision
statuses later than Rev. 1.2. Further information on this
Object can be found under www.festo.com/fieldbus.
Instances: 1
Object class: 199
Object class: 136
Instances: 1
This Object is only available in the operating mode Remote
Controller. It contains the number of I/O bytes for
communication of theCPX-FB32 with the CPX-FEC or CPX-CEC.
Setting is made through DIL switches on the CPX-FB32
(see Tab. 1/3).
Type Function
no.
ARRAY –
Type
BYTE
BYTE
B-37