System Object (For Operating Mode Remote I/O - Festo CPX-FB32 Manual

B. Ethernet/IP Objects of the CPX-FB32
B.4.2 System Object (for operating mode Remote I/O)
Attr. Access Description
No.
1 Get CPX operating mode (bit 0 ... 3)
0: Remote I/O without FEC/CEC
1: Remote I/O with FEC or CEC
2: Remote controller without bus node
3: Remote controller with bus node
CPX equipment status (bit 4)
Specifies whether the current equipment fitted
to the CPX corresponds to the saved CPX
equipment status.
0: equal
1: unequal
Handheld (bit 5)
Specifies whether or not a handheld is
connected.
0: No handheld connected
1: Handheld connected
Force mode (bit 6)
Specifies whether Force is blocked or enabled.
0: blocked
1: enabled
Bit 7: reserved
B-16
Object class: 132
Instances: 1
This Object is only available in the operating mode
Remote I/O.
Type Function no.
BYTE 0 (bit 0 ... 3)
0 (bit 4)
0 (bit 5)
0 (bit 6)
0 (bit 7)
Festo P.BE-CPX-FB32-EN en 1111a