Festo CPX-FB32 Manual page 52

2. Commissioning
Example terminal 3
modified
Module no.: 0 1
16DI
1 2
1
Modified status bits deactivated
2
Modified: 8DI module replaced by
16DI module
Fig. 2/4: Example terminal 3 after extension/modification(compare with Fig. 2/3)
2-18
The next diagram shows with terminal 3 as an example
(see Fig. 2/3) the effects of modifications to the address
assignment.
The following has been changed:
– The status bits have been deactivated.
– In the case of module no. 1 an 8-input module has been
replaced by a 16-input module.
– The pneumatic interface has been set to 16 O in order to
reserve addresses for an extension to the pneumatics.
2 3 4
8DI 4DO 8DI
5 6
8DO 2AO
16 O
3
3
Modified: Pneumatic interface
(set with DIL switch to 1 ... 16 valve
coils)
Festo P.BE-CPX-FB32-EN en 1111a