Setting Up An Unsegmented Network - Quantum DXi4500 Manual

Setting Up an
Unsegmented Network
Network CLI Commands
• wan: all but one interfaces are bonded together for WAN configuration
• lan: all but one interfaces are bonded together for LAN configuration
• data: all but one interfaces are bonded together for DATA configuration
• --bondalgo: Type of bonding algorithm.
• --hostname: Name of this host.
• --msip: IP address for Management Segment.
• --msnetmask: Netmask for Management Segment
• --msgateway: Management Segment gateway.
• --rsip: IP address for Replication Segment.
• --rsnetmask: Netmask for Replication Segment.
• --rsgateway: Gateway for Replication Segment.
• --dsip: IP address for Data Segment.
• --dsnetmask: Netmask for Data Segment.
• --dsgateway: Gateway address for Data Segment
• --dnsprimary: Primary IP address for DNS.
• --dnssecondary: Secondary IP address for DNS.
• --dnstertiary: Tertiary IP address for DNS.
• --dnssearchpath: Search path for DNS name lookup.
syscli --setnetwork unsegmented --ip <ip_address> --netmask <netmask>
[--bondalgo { lacp | brr }] [--hostname <hostname>] --defaultgateway
<gateway_ip> [--dnsprimary <dns_primary_ip_address>] [--dnssecondary
<dns_secondary_ip_address>] [--dnstertiary <dns_tertiary_ip_address>] [-
-dnssearchpath <dns_search_path_string>] [--sure]
This CLI command allows the admin user to set up an unsegmented network.
Note: Some network changes require a system reboot. Any change to the
hostname, IP related information (IP, netmask, and/or gateway) and
bonding information will cause a system reboot. This command is not
available if a custom network configuration is already in place.
CLI command options:
• --setnetwork: Setting up the unsegmented network. Some network
changes require system reboot.
• --ip: IP address of the system.
• --netmask: Net mask of the system network.
• --bondalgo: Bonding algorithm.
• --hostname: Name of this host.
• --defaultgateway: Default gateway IP address.
• --dnsprimary: Primary IP address of DNS.
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
75