Listing The Health Check Status; Editing The Health Check; Getting The General Status Of System Health Checks - Quantum DXi4500 Manual

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
Listing the Health
Check Status
Editing the Health
Check
Getting the General
Status of System Health
Checks
98
syscli --list healthcheckstatus
This CLI command lists the healthcheck status of certain components in the
system.
Sample output:
bash‐3.2$ syscli ‐‐list healthcheckstatus
Output data:
Healthcheck Status
Total count = 2
HealthCheck = 1
Healthcheck Name = De‐Duplication
State = enabled
Started = Sun Dec 19 05:00:05 2010
Finished = Sun Dec 19 05:00:05 2010
Status = Success
HealthCheck = 2
Healthcheck Name = Integrity
State = enabled
Started = Sun Dec 19 05:00:08 2010
Finished = Sun Dec 19 05:00:08 2010
Status = Success
Command completed successfully.
syscli --edit healthcheck --name <healthcheck_name> --enable | --disable
This CLI command allows the admin user to enable or disable the health check
on a specified healthcheck name.
syscli --getstatus healthcheck
This CLI command displays the general status of system health checks.
Sample:
bash‐3.2$ syscli ‐‐getstatus healthcheck
Output data:
General Healthchecks
Status = Success
Progress = 100 %
Start Time = Sun Dec 19 05:00:04 2010
Health Check CLI Commands