Table of Contents
Advertisement
Listing the Replicated
NAS Recovery Jobs on
Target
Deleting the Replicated
VTL Recovery Jobs on
the Target
Deleting the Replicated
NAS Recovery Jobs on
Target
Listing the Replicated
VTL Failback Jobs on
the Target
Replication CLI Commands
Recovery Job Finished = Mon Jun 1 11:22:43 2009
Recovery Job Status = Success
syscli --list nasrecjob
This CLI command allows the user to list the replicated NAS recovery jobs on the
target. The information listed includes the old and the new NAS share name,
source host name or IP address and recovery job details. The recover job details
contains when the job started, finished and its status.
syscli --del vtlrecjob -repname <VTL_name> --srchost <source_hostname>
--id <ID_of_the_recovery_job>
This CLI command allows the CLI admin to delete a replicated VTL recovery job.
The replicated VTL name, source host name and the ID can be retrieved from the
list VTL Recovery jobs.
syscli --del nasrecjob --repname <NAS_share_name> --srchost
<source_hostname> --id <ID_of_the_recovery_job>
This CLI command allows the admin user to delete a replicated NAS recovery
job. The replicated NAS share name, source host name and the ID can be
retrieved from the list NAS Recovery jobs.
syscli --list vtlfailbackjob
This CLI command allows the user to list the replicated VTL failback jobs on the
target. The information listed includes the VTL name, source host name or IP
address and failback job details. The failback job details contains when the job
started, finished and its status.
Output data:
List of all replicated VTL failback jobs:
Total count = 1
[failback job = 1]
ID = 1
VTL Name = part4
Target Host = 10.40.164.70
Failback Job Started = Wed Jun 3 16:45:53 2009
Failback Job Finished = Wed Jun 3 16:46:01 2009
Failback Job Status = Success
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
53
Advertisement
Table of Contents
