Failback A Nas Share On The Target; Deleting A Replicated Vtl From The Target; Deleting A Nas Share On The Target; Listing The Replicated Vtl Recovery Jobs On The Target - Quantum DXi4500 Manual

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
Failback a NAS Share on
the Target
Deleting a Replicated
VTL from the Target
Deleting a NAS Share
on the Target
Listing the Replicated
VTL Recovery Jobs on
the Target
52
syscli --failback repnas --repname <replicated_NAS_share_name> --srchost
<source_hostname> --id <ID_of_the_replicated_NAS> --tgthost
<target_source_IP_address> [--encrypt]
This CLI command allows the admin user to failback a replicated share to its
specified source. The replicated NAS share name, source hostname and ID can
be retrieved from the list of replicated NAS share. The --tgthost option specifies
the target host where the replicated NAS share will be failed back to.
To complete the failback, on the source system, run the --recover share CLI
command specifying the recovered share from the replicated share list and
select Recover.
Before you can failback a share to its source, the target role IP address must be
configured on the source system first.
If the --encrypt option is specified, it encrypts the failback to the failback target.
syscli --del repvtl --repname <replicated_VTL_name> --srchost
<source_host> --id <ID>
This CLI command allows the CLI admin to delete a replicated VTL from the
target system. The replicated VTL name, source hostname and ID can be
retrieved from the list of replicated VTL.
syscli --del repnas --repname <NAS_name> --srchost
<source_hostname_or_IP_address> --id <ID_of_the_replicated_NAS>
This CLI command allows the admin user to delete a replicated NAS share from
the target system. The replicated NAS share name, source hostname and ID can
be retrieved from the list of replicated NAS share.
syscli --list vtlrecjob
This CLI command allows the user to list the replicated VTL recovery jobs on the
target. The information listed includes the old and the new VTL name, source
host name or IP address and recovery job details. The recover job details
contains when the job started, finished and its status.
Output data:
List of all replicated VTL recovery jobs:
Total count = 1
[recovery job = 1]
ID = 1
Original VTL Name = VTL1
New VTL Name = VTL1_REC
Source Host = galaxy.node
Recovery Job Started = Mon Jun 1 11:22:17 2009
-
1
Replication CLI Commands