Deleting A San Client Group; Listing Vtl Storage Locations And Index - Quantum DXi4500 Manual

Deleting a SAN Client
Group
Listing VTL Storage
Locations and Index
VTL Configuration CLI Commands
syscli --del sanclientgroup --name <VTL_name> --groupname
<group_name>
This CLI command allows the CLI admin to delete a SAN client group given the
required VTL name and the group name.
syscli --list vtlstorage --name <VTL_name> --loc source | dest [--type drive |
slot | ieslot]
This CLI command allows the CLI admin to list the source and destination
storage locations. This is useful to determine the locations to move or unload
media command. If the --type option is specified, only locations of the specified
type is listed.
Below is a sample output of this CLI with a VTL name and destination location
specified:
syscli --list vtlstorage --name VTL1 --loc dest
Output data:
List of VTL storage locations:
Total count = 4
[storage location = 1]
location type = I/E Slot
index = 0
drive serial number = N/A
barcode = N/A
writeprotect = disabled
access = N/A
used = N/A
[storage location = 2]
location type = I/E Slot
index = 1
drive serial number = N/A
barcode = N/A
writeprotect = disabled
access = N/A
used = N/A
[storage location = 3]
location type = I/E Slot
index = 2
drive serial number = N/A
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
27