Quantum DXi4500 Manual page 100

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
CLI Error Codes
100
With this release, the following CLI error codes are supported:
Error Code Error Message
E0000 Error is undefined (programmer forgot to handle error)
E0001 Success
E0003 Failed
E0004 Unknown error.
E0005 Failed for internal error
E0006 Command executed successfully by noded but failed to read
output
E0007 Command failed when executed by noded.
E0008 Command succeeded when executed by noded.
E0010 Programmer's development error (must not be seen in
production code)
E0011 Allocated buffer is too small.
E0012 Programmer's error: pass empty array to Init() - must not be
seen in production code
E0013 Programmer's error: pass NULL to a function
E0021 Input data is in error
E0022 Input data is in valid
E0023 Input parameter(s) is in error
E0024 Input argument(s) is in error
E0025 Error code not found.
E0100 Command: unsupported (unrecognized)
E0101 Command: this command is not implemented yet
E0102 Command: subcommand is unsupported (unrecognized
subcommand).
E0103 Command: subcommand is not implemented yet.
E0104 Command: option is invalid or not supported.
E0105 Command: support for this option is not implemented yet
E0106 Command: data validation is not implemented yet
E0107 Command: do-function is not implemented yet
CLI Error Codes