Quantum DXi4500 Manual page 300

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
300
Error Code Error Message
E9005613 DisablePtt: Option "wwpn" has invalid value
E9005614 DisablePtt: Failed to read/get option "wwpn".
E9005615 DisablePtt: Failed to write/set option "wwpn".
E9005661 DisablePtt failed!
E9005662 Disableptt gc command failed!
E9005663 Disableptt failed up update conf file!
E9005664 Disableptt not supported!
E9005665 No matching FC port to disable!
E11000001 Buffer Area is uninitialized.
E11000002 Failed to retrieve VTL Summary!
E11000003 Failed to get node number for the drive!
E11000004 Invalid drive!
E11000005 Failed to open drive stat file!
E11000006 No tape drives found!
E11000007 Invalid VTL !
E11000008 Invalid barcode!
E11000009 VTL: cart does not exist!
E11000010 The given Ethernet Switch does not exist!
E11000011 The given Fibre Channel Switch does not exist!
E11000012 The given Storage Array does not exist!
E11000013 The given FC Adapter does not exist!
E11000014 The status xml file does not exist!
E11000401 GetstatusVtlperf: Option "getstatus" is missing.
E11000402 GetstatusVtlperf: Option "getstatus" requires a value
E11000403 GetstatusVtlperf: Option "getstatus" has invalid value
E11000404 GetstatusVtlperf: Failed to read/get option "getstatus".
E11000405 GetstatusVtlperf: Failed to write/set option "getstatus".
E11000411 GetstatusVtlperf: Option "vtl" is missing.
E11000412 GetstatusVtlperf: Option "vtl" requires a value
E11000413 GetstatusVtlperf: Option "vtl" has invalid value
E11000414 GetstatusVtlperf: Failed to read/get option "vtl".
CLI Error Codes