Quantum DXi4500 Manual page 287

CLI Error Codes
Error Code Error Message
E8105625 AddIpaddr: Option "gateway" requires a value
E8105626 AddIpaddr: Option "gateway" has invalid value
E8105627 AddIpaddr: Value of option "gateway" is too long
E8105628 AddIpaddr: Failed to read/get option "gateway".
E8105629 AddIpaddr: Failed to write/set option "gateway".
E8105631 AddIpaddr: Option "clientid" is missing.
E8105632 AddIpaddr: Option "clientid" requires a value
E8105633 AddIpaddr: Option "clientid" has invalid value
E8105634 AddIpaddr: Value of option "clientid" is too long
E8105635 AddIpaddr: Failed to read/get option "clientid".
E8105636 AddIpaddr: Failed to write/set option "clientid".
E8105641 AddIpaddr: Option "ip" has invalid value
E8105642 AddIpaddr: Value of option "ip" is too long.
E8105643 AddIpaddr: Failed to read/get option "ip"
E8105644 AddIpaddr: Failed to write/set option "ip".
E8105651 AddIpaddr: Option "netmask" has invalid value
E8105652 AddIpaddr: Value of option "netmask" is too long.
E8105653 AddIpaddr: Failed to read/get option "netmask"
E8105654 AddIpaddr: Failed to write/set option "netmask".
E8105661 AddIpaddr: Option "sid" is missing.
E8105662 AddIpaddr: Option "sid" requires a value
E8105663 AddIpaddr: Option "sid" has invalid value
E8105664 AddIpaddr: Failed to read/get option "sid".
E8105665 AddIpaddr: Failed to write/set option "sid".
E8105671 AddIpaddr failed!
E8105701 AddIpaddr: No ethernet device found.
E8105702 AddIpaddr: There was an error validating the IP address,
netask or gateway.
E8105703 AddIpaddr: There was an error saving the new IP address
configuration.
E8105704 AddIpaddr: Cannot add more than allowed maximum IP.
E8105705 AddIpaddr: Invalid Netmask specified.
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
287