Listing Devices; Listing The San Client Group - Quantum DXi4500 Manual

Listing Devices

Listing the SAN Client
Group
VTL Configuration CLI Commands
node = 1
alias = FC3
wwpn = 214108001bc08278
syscli --list device --name <VTL_name>
This CLI command allows the CLI admin to display a list of devices on the
system. The list includes the type of device (VMC or VTD), serial number of the
device and the virtual tape library name the device is in. An example output of
devices on the system is shown below.
List of devices:
Total count = 3
[device = 1]
vtl name = MyVTL
type = VMC
serial = VL01SV0825BVA04501
[device = 2]
vtl name = MyVTL
type = VTD
serial = VL01SV0825BVA04501
[device = 3]
vtl name = MyVTL
type = VTD
serial = VL01SV0825BVA04501
syscli --list sanclientgroup [--vtlname <VTL_name>]
This CLI command allows the CLI admin to display a list of existing SAN client
group(s) on the system. The list returned contains the virtual tape library name,
group name, host, target and devices associated with the group. If a virtual
library name is specified, this CLI lists only the group associated with the virtual
tape library.
An example output of a SAN client group is shown below.
List of SAN client groups:
Total count = 1
[group = 1]
vtl name = MyVTL
group name = Group1
host =
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
25