Table of Contents
Advertisement
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
Checking Readiness on
Source
Aborting Replication of
VTL or NAS
Aborting
Synchronization of VTL
or NAS
Pausing the Replication
Service on the Source
Resuming the
Replication Service on
the Source
Enabling All Replication
for Both VTL and NAS
on the Source
Disabling All
Replication for Both
VTL and NAS on the
Source
Clearing Replication
Statistics
48
syscli --checkrepready nas --name <nas_share>
This CLI command allows the admin user to check and verify the status of the
NAS share prior to replicating. The output will show the status of the NAS.
syscli --checkrepready vtl --name <vtl_name>
This CLI command allows the admin user to check and verify the status of the
VTL prior to replicating. The output will show the status of the VTL.
syscli --abortrep vtl --name <VTL_name>
syscli --abortrep nas --name <NAS_share_name>
The CLI allows the admin user to abort the current replication of the VTL or NAS.
syscli --abortsync vtl --name <VTL_name>
syscli --abortsync nas --name <NAS_share_name>
The CLI allows the admin user to abort the current synchronization of the VTL or
NAS.
syscli --pause replication
The CLI allows the admin user to pause an active replication.
syscli --resume replication
The CLI allows the admin user to resume the previous replication that was
paused.
syscli --enablerep all
This CLI command allows the admin user to enable the state of all replication for
all deduplicated VTLs and shares
syscli --disablerep all
This CLI command allows the admin user to disable the state of all the
replication in the queue.
syscli --clear stats [--sent] [ --received]
Replication CLI Commands
Advertisement
Table of Contents
