Quantum DXi4500 Manual page 226

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
226
Error Code Error Message
E6003255 Nodemanage: Failed to start node as IPMI is not supported .
E6003256 Nodemanage: Failed to restart node as IPMI is not
supported.
E6003257 Nodemanage: Invalid NodeID.
E6003258 Nodemanage: Unknown Error.
E6003259 Nodemanage: The event handler is already registered.
E6003260 Nodemanage: There are no event handlers registered.
E6003261 Nodemanage: An error occurred while performing a system
call.
E6003262 Nodemanage: The file could not be found.
E6003263 Nodemanage: The buffer size is too small.
E6003264 Nodemanage: Not enough memory available to perform the
operation.
E6003265 Nodemanage: An error occurred while posting an event.
E6003266 Nodemanage:Invalid argument.
E6003267 Nodemanage:Failed to join the node to the cluster.
E6003268 Nodemanage:The node is already joined to the cluster.
E6003269 Nodemanage:Failed to unjoin the node from the cluster.
E6003270 Nodemanage:The node is already unjoined from the cluster.
E6003271 Nodemanage:The node is in a transient state.
E6003272 Nodemanage:Failed to reboot the node.
E6003273 Nodemanage:Failed to shutdown the node.
E6003274 Nodemanage:The node is already stopped.
E6003275 Nodemanage:The node is already started.
E6003276 Nodemanage:Failed to stop the node.
E6003277 Nodemanage:The node is not reachable through the
network.
E6003278 Nodemanage:The node is stopped.
E6003279 Nodemanage:The operation cannot be performed on the
local node.
E6003280 Nodemanage:The operation failed on one or more nodes.
E6003281 Nodemanage:Too many event handlers are already
registered.
E6003282 Nodemanage:Failed to parse the file.
CLI Error Codes