Quantum DXi4500 Manual page 277

CLI Error Codes
Error Code Error Message
E8100104 Qnet restart services failure
E8100201 Null QNet Handle
E8100202 IO Error in QNet
E8100203 Invalid Ethernet port.
E8100204 Invalid L2EP Handle
E8100205 Invalid L3EP Handle
E8100206 Invalid Handle
E8100207 System Configure - Reserved
E8100208 IP address already used
E8100209 IP address is invalid.
E8100210 Destination is invalid.
E8100211 Gateway is invalid.
E8100212 Unable to load network data.
E8100401 SetHostname: Option "set" is missing.
E8100402 SetHostname: Option "set" requires a value
E8100403 SetHostname: Option "set" has invalid value
E8100404 SetHostname: Failed to read/get option "set".
E8100405 SetHostname: Failed to write/set option "set".
E8100411 SetHostname: Option "name" is missing.
E8100412 SetHostname: Option "name" requires a value
E8100413 SetHostname: Option "name" has invalid value
E8100414 SetHostname: Failed to read/get option "name".
E8100415 SetHostname: Failed to write/set option "name".
E8100421 SetHostname: Option "sid" is missing.
E8100422 SetHostname: Option "sid" requires a value
E8100423 SetHostname: Option "sid" has invalid value
E8100424 SetHostname: Failed to read/get option "sid".
E8100425 SetHostname: Failed to write/set option "sid".
E8100431 SetHostname failed!
E8100801 GetHostname: Option "get" is missing.
E8100802 GetHostname: Option "get" requires a value
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
277