Quantum DXi4500 Manual page 276

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
276
Error Code Error Message
E8054851 ListEthports failed!
E8054852 Sysapi_GetEthDeviceInfo failed!
E8055201 ListBonds: Option "list" is missing.
E8055202 ListBonds: Option "list" requires a value
E8055203 ListBonds: Option "list" has invalid value
E8055204 ListBonds: Failed to read/get option "list".
E8055205 ListBonds: Failed to write/set option "list".
E8055206 ListBonds: failed!
E8055207 Sysapi_GetBondInfo failed!
E8055208 Sysapi_GetBondInfo: Failed to get internal list of bonds!
E8055209 Sysapi_GetBondInfo: Failed to determine if bond is an
internal one!
E8055601 UndoNetcfg: Option "undo" is missing.
E8055602 UndoNetcfg: Option "undo" requires a value
E8055603 UndoNetcfg: Option "undo" has invalid value
E8055604 UndoNetcfg: Failed to read/get option "undo".
E8055605 UndoNetcfg: Failed to write/set option "undo".
E8055651 UndoNetcfg failed!
E8100001 Database failure
E8100002 Invalid session id
E8100003 Session already closed or timed out
E8100004 Failed to send admin alert
E8100005 Unknown exception caught
E8100006 Session has not started (hence session ID is not cached yet).
E8100007 Session ID in cache is ambiguous. Specify it explicitly on
command line.
E8100008 Session ID in cache is bad. Specify it explicitly on command
line.
E8100100 Qnet load failure
E8100101 Qnet validation failure
E8100102 Qnet save failure
E8100103 Qnet apply failure
CLI Error Codes