Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
Listing the Replicated
NAS Failback Jobs on
the Target
Deleting the Replicated
VTL Failback Jobs on
the Target
Deleting the Replicated
NAS Failback Job on the
Target
Aborting the Replicated
VTL Failback Jobs on
the Target
Aborting the Replicated
NAS Failback Job on the
Target
Enabling the VTL
Cartridge Based
Replication on the
Target
Enabling NAS File/
Directory Based
Replication on the
Target
54
syscli --list nasfailbackjob
This CLI command allows the user to list the replicated NAS share failback jobs
on the target.
syscli --del vtlfailbackjob -repname <VTL_name> --tgthost
<target_hostname> --id <ID_of_the_failback_job>
This CLI command allows the CLI admin to delete a replicated VTL failback job.
The replicated VTL name, target host name and the ID can be retrieved from the
list VTL Failback jobs.
syscli --del nasfailbackjob --repname <NAS_share_name> --tgthost
<target_hostname> --id <ID_of_the_failback_job>
This CLI command allows the admin user to delete a replicated NAS share
failback job. The replicated NAS share name, target host name and the ID can be
retrieved from the list NAS Failback jobs.
syscli --abort vtlfailbackjob -repname <VTL_name> --tgthost
<target_hostname> --id <ID_of_the_failback_job>
This CLI command allows the CLI admin to abort a current running replicated
VTL failback job. The replicated VTL name, target host name and the ID can be
retrieved from the list VTL Failback jobs.
syscli --abort nasfailbackjob --repname <NAS_share_name> --tgthost
<target_hostname> --id <ID_of_the_failback_job>
This CLI command allows the admin user to abort a current running replicated
NAS share failback job. The replicated NAS share name, target host name and
the ID can be retrieved from the list NAS Failback jobs.
syscli --enable cartrep --name <VTL_name> [--syncid <sync_id>] [--locked]
This CLI allows the admin user to enable cartridge based replication for the
specified VTL on the target. If the sync ID is not specified, the VTL name is used
as the default sync ID.
syscli --enable filedirrep --name <NAS_share_name> [--syncid <sync_id>]
[--locked]
This CLI command allows the admin user to enable file or directory based
replication on the target. If the sync ID is not specified, the share name is used
as the default sync ID.
Replication CLI Commands