Table of Contents
Advertisement
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
Path To Tape CLI Commands
Listing the Path to Tape
Initiator
Listing the Path to Tape
Ports
Adding a Backup User
Editing a Backup User
90
The following Path to Tape CLI commands are available:
•
Listing the Path to Tape Initiator
•
Listing the Path to Tape Ports
•
Adding a Backup User
•
Editing a Backup User
•
Deleting a Backup User
•
Deleting All Backup Users
•
Listing Backup Users
•
Listing Medium Changers
•
Listing Tape Drives
•
Scanning Devices
•
Using Medium Changers
•
Using Tape Drives
syscli --list pttinitiator
This CLI command provides a list of path to tape initiators that are present on
the system.
syscli --list port
This CLI command provides a list of initiator and target ports that are present on
the system. The output parameters, Row and Column, of this command give the
relative node port location in row and column, respectively.
syscli --add backupuser --name <backup_user_name> --password
<backup_user_password> [--desc <description>]
This CLI command allows the admin user to add a backup application user.
• --desc: user description. Enclosed in double quotes if string contains spaces
or special characters.
syscli --edit backupuser --name <backup_user_name> --password
<backup_user_password> [--desc <description>]
This CLI command allows the admin user to edit a backup application user.
• --desc: user description. Enclosed in double quotes if string contains spaces
or special characters.
Path To Tape CLI Commands
Advertisement
Table of Contents
