Quantum DXi4500 Manual page 281

CLI Error Codes
Error Code Error Message
E8102844 SetBond: Failed to write/set option "slave".
E8102845 SetBond: Option "slave" is missing.
E8102851 SetBond: Option "sid" is missing.
E8102852 SetBond: Option "sid" requires a value
E8102853 SetBond: Option "sid" has invalid value
E8102854 SetBond: Failed to read/get option "sid".
E8102855 SetBond: Failed to write/set option "sid".
E8102901 SetBond failed!
E8102902 SetBond: Invalid bond label.
E8102903 SetBond: Eth port specified for slave is not found.
E8102904 SetBond: Speed type for the specified slave is not compatible.
E8102905 SetBond: Two or more slave eth device must be specified.
E8103201 UnsetBond: Option "unset" is missing.
E8103202 UnsetBond: Option "unset" requires a value
E8103203 UnsetBond: Option "unset" has invalid value
E8103204 UnsetBond: Failed to read/get option "unset".
E8103205 UnsetBond: Failed to write/set option "unset".
E8103211 UnsetBond: Option "label" is missing.
E8103212 UnsetBond: Option "label" requires a value
E8103213 UnsetBond: Option "label" has invalid value
E8103214 UnsetBond: Failed to read/get option "label".
E8103215 UnsetBond: Failed to write/set option "label".
E8103221 UnsetBond: Option "sid" is missing.
E8103222 UnsetBond: Option "sid" requires a value
E8103223 UnsetBond: Option "sid" has invalid value
E8103224 UnsetBond: Failed to read/get option "sid".
E8103225 UnsetBond: Failed to write/set option "sid".
E8103231 UnsetBond failed!
E8103232 UnsetBond: Cannot find bond device.
E8103601 ListEthdev: Option "list" is missing.
E8103602 ListEthdev: Option "list" requires a value
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
281