Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
Listing the Cartridge
Replication Status and
Statistics
Listing the VTL
Cartridge Replication
Status and Statistics
Statistics Report CLI Commands
Displaying the Disk
Usage Statistics
Displaying Data
Reduction Statistics
Displaying the Ingest
Throughput Rate
OST CLI Commands
56
syscli --list cartrepstats --name <VTL name>
Lists the cartridge-based replication status and statistics of the data sent to the
target for the specified share on the source system.
syscli --list carttarget [--name <VTL name>]
This CLI command returns the lists of VTL with deduplication enabled that can
be configured for cartridge-based replication on target. When the VTL name is
specified, the status of any cartridge-based replication is also displayed for the
specified VTL.
The following sections are the supported statistics report CLI commands:
•
Displaying the Disk Usage Statistics
•
Displaying Data Reduction Statistics
•
Displaying the Ingest Throughput Rate
syscli --get diskusage
This CLI command displays the disk usage statistics of the system.
syscli --get datareductionstat
This CLI command displays the dedup data reduction statistics of the system.
syscli --get ingestrate
This CLI command displays the ingest throughput rate of the system.
The following sections are the supported OST CLI commands:
•
Adding a Storage Server
•
Deleting Storage Server
•
Editing a Storage Server
Statistics Report CLI Commands