Quantum DXi4500 Manual page 105

CLI Error Codes
Error Code Error Message
E1417 File: Failed to acquire read-lock on file.
E1418 File: Failed to back up file.
E1419 File: Failed to restore backup file.
E1420 File is empty.
E1421 File is read-only.
E1422 File does not exist.
E1423 File has incorrect permissions
E1424 File has no specified section
E1430 File: Failed to open log file.
E1431 File: Failed to open syscli.log.
E1432 File: Failed to open signal.log.
E1450 Unable to send signal to process
E1451 Unable to get process ID
E1452 Invalid process ID
E1453 Destination process is not running
E1454 Process name is missing
E1500 Program aborted by interrupt signal
E1501 Program aborted by delayed interrupt signal
E1502 Program aborted by segmentation fault (SIGSEGV)!
E1503 Failed to spawn child process
E1600 Section is not found.
E1601 Key is not found.
E1602 Parameter not found.
E1603 Parameter not found in the specified section.
E1604 Value is not found.
E1605 Key value pair is not found.
E2000 This command requires admin privilege to run.
E2001 This command requires monitoring privilege to run.
E3001 Locking: null pointer
E3002 Locking: invalid openfile type
E3003 Locking: invalid parameter
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
105