Listing Replicated Vtl On The Target; Listing A Replicated Nas Share On The Target - Quantum DXi4500 Manual

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
Listing Replicated VTL
on the Target
Listing a Replicated
NAS Share on the
Target
50
syscli --list repvtl
This CLI command allows the CLI admin to display a list of all the replicated
virtual tape libraries (VTLs) that have been performed on the system as a target.
The list includes the virtual tape library name, source hostname IP address, the
replication status (i.e. start, completion and status).
An example output of this command:
List of all replicated VTL on the target.
Total count = 1
[replicated vtl = 1]
ID = 1
VTL Name = test1
Source Host = Galaxy3.node
Replication Started = Thu Mar 5 13:08:59 2009
Replication Finished = Thu Mar 5 13:08:59 2009
Replication Status = Success
syscli --list repnas
This CLI command allows the admin user to display a list of all the replicated
NAS share(s) that have been performed on the target system. The list includes
the NAS share name, source hostname IP address, the replication status (i.e.
start, completion and status).
An example output of this command:
List of all replicated NAS share on the target:
Total count = 2
[replicated nas = 1]
ID = 1
NAS Share Name = nas_cifs1
Source Host = galaxy.quantum
Replication Started = Wed Jun 3 16:38:20 2009
Replication Finished = Wed Jun 3 16:38:30 2009
Replication Status = Success
[replicated nas = 2]
ID = 1
NAS Share Name = nas_nfs1
Source Host = galaxy.quantum
Replication Started = Wed Jun 3 16:38:03 2009
Replication Finished = Wed Jun 3 16:38:11 2009
-
1
-
est.com
-
est.com
Replication CLI Commands