SMA Solar Technology AG
9.1.2
Disassembling and Mounting the Protective Covers
Figure 12: Position of the protective covers
Position
A
Danger to life due to electric shock or electric arc if live components are touched
• Switch off the inverter and wait at least 15 minutes before opening it to allow the capacitors to discharge
completely.
• Disconnect the inverter (see Section 5, page 50).
Disassembling the protective covers
Requirements:
☐ The panels must be disassembled (see Section 9.1.1, page 76).
Procedure:
• Disassemble the protective covers.
Mounting the protective covers
1. Tighten all protective covers (torque: 5 Nm).
2. Ensure that the protective covers are firmly in place.
User Manual
Designation
Protective cover
DANGER
9 Periodic Actions
SCCPXT-E7-BA-en-58
77