Sunny String-Monitor - SMA SUNNY CENTRAL 500CP XT User Manual

11 Operating Data and Parameters
Name Description
DevFunc* Manages the Sunny String-Moni-
tors
* To change these parameters, you must enter the installer password.

11.2.3 Sunny String-Monitor

Name Description
TMittelung* Duration of averaging of current
measurements
String Anzahl* Number of detected strings
SW Version Current firmware version
SSM Identifier* Identification number of Sunny
String-Monitor
Group String Assigns strings to their respective
1* group
Group String* All groups
No.of String 1* Number of connected strings in
the respective group
No.of Strings* All groups
Monitoring1 Start of monitoring of strings in
On* group 1
Monitoring1 End of monitoring of strings in
Off* group 1
142 SCCPXT-E7-BA-en-58
Value/range Explanation
AutoDetect_ Searches for all Sunny String-
SSMU Monitors and deletes previ-
ously detected Sunny String-
Monitors
DetectSSMU Searches for undetected
Retry Sunny String-Monitors only
DelAll_SSMU Deletes all detected
Sunny String-Monitors
Factory Resets all parameters to default
settings.
Value/range Explanation
0 s to 6,000 s ‒
0 to 8 ‒
1 to 40 Value cannot be changed
1 to 99 ‒
0 to 3 Parameter exists for all eight
groups
0 to 3 ‒
1 to 4 Parameter exists for all eight
groups
If you wish to use this function,
contact us (see Section 13,
page 153).
1 to 4 ‒
0:00 a.m. to Parameter exists for all eight
11:59 p.m. groups
Configure the string settings
preferably via the Sunny Cen-
tral String-Monitor Controller.
0:00 a.m. to Parameter exists for all eight
11:59 p.m. groups
Configure the string settings
preferably via the Sunny Cen-
tral String-Monitor Controller.
SMA Solar Technology AG
Default
value
0
Default
value
30 s
0
0
0
0
‒
‒
0
0
User Manual