Leds On The Network Port - SMA SUNNY CENTRAL 500CP XT User Manual

3 Product Overview
LED designation
H2
H3
H4
H5
H6
H7
H8
3.3.3.2

LEDs on the Network Port

Figure 8: LEDs on the network port
Position LED
A Speed
B Link/Activity
24 SCCPXT-E7-BA-en-58
Status Explanation
flashing green The SC-COM is communicating with the devices connected within the
system.
glowing green Internal communication has taken place in the last five minutes.
glowing red An error has occurred in the internal communication.
off No internal communication for more than five minutes.
flashing red The SC-COM is starting up.
glowing red An error has occurred in the SC-COM.
glowing green The SC-COM is ready for use.
glowing green An internal memory card exists and less than 92% of its storage ca-
pacity is used.
glowing red The internal memory card is full and the oldest saved data is being
overwritten.
flashing red 92% of the storage capacity of the internal memory card is used.
glowing green An external memory card exists and less than 92% of its storage ca-
pacity is used.
glowing red The external memory card is full.
flashing red 92% of the storage capacity of the external memory card is used.
off There is no external memory card.
- Not assigned
- Not assigned
flashing green Application is running.
Color Status
yellow on
off
green on
flashing
off
SMA Solar Technology AG
Explanation
100 MBit data transfer rate
10 MBit data transfer rate
Connection (Link) established.
The SC-COM is transmitting or receiving data (Ac-
tivity).
No connection established.
User Manual