Status Symbols; Symbols On The Product - SMA SUNNY CENTRAL 500CP XT User Manual

SMA Solar Technology AG
3.3.4.3

Status Symbols

Depending on the status of the device communication, the device symbols are displayed in the tree or device view with
various status symbols.
Symbol Explanation
The inverter is ready for operation.
There is an error in the inverter.
An error has occurred in the communication with the inverter.
3.4

Symbols on the Product

The following gives an explanation of all the symbols found on the inverter and on the type label.
Symbol Designation
CE marking
Protection class I
Degree of protection IP54
Beware of a danger zone
Beware of dangerous volt-
age
Beware of hot surface
Use hearing protection.
Observe the documenta-
tion.
User Manual
Explanation
The product complies with the requirements of the applicable EU di-
rectives.
All electrical equipment is connected to the grounding conductor sys-
tem of the product.
The product is protected against interior dust deposits and splashing
water from all angles.
This warning symbol indicates a danger zone. Be particularly vigilant
and cautious when working on the product.
The product operates at high voltages. All work on the product must
be carried out by qualified persons only.
The product can get hot during operation. Avoid contact during oper-
ation. Allow the product to cool down sufficiently before carrying out
any work. Wear personal protective equipment such as safety
gloves.
The product generates loud noises. When working on the product,
wear hearing protection.
Observe all documentation supplied with the product.
3 Product Overview
SCCPXT-E7-BA-en-58 27