Disassembling And Mounting The Protective Covers - SMA SUNNY CENTRAL 500CP XT Maintenance Manual

SMA Solar Technology AG
7.1.2

Disassembling and Mounting the Protective Covers

Figure 19: Position of the protective covers
Position
A
Danger to life due to electric shock or electric arc if live components are touched
• Switch off the inverter and wait at least 15 minutes before opening it to allow the capacitors to discharge
completely.
• Disconnect the inverter (see Section 4, page 26).
Disassembling the protective covers
Requirements:
☐ The panels must be disassembled (see Section 7.1.1, page 62).
Procedure:
• Disassemble the protective covers.
Mounting the protective covers
1. Tighten all protective covers (torque: 5 Nm).
2. Ensure that the protective covers are firmly in place.
Maintenance Manual
Designation
Protective cover
DANGER
7 Periodic Actions
SCCPXT-E7-WA-en-37 63