Parameters And Values For The File Custom.xml - SMA SUNNY CENTRAL 500CP XT User Manual

12 Appendix
Elements of the XML file
<Info>
<Version>my config V1.01</Version>
</Info>
<Config>
<Key>NetworkSettings_DhcpUsage1</Key>
<Value>False</Value>
</Config>
<Loader>
<Settings>
<PowerFail>2500</PowerFail>
</Settings>
</Loader>
Example: XML file for setting the Czech language on the user interface
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<WebBox xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:xsi="http://www.w3.org/2001/
XMLSchema-instance" xsi:noNamespaceSchemaLocation="config_100.xsd">
<Info>
<Version>my config V1.01</Version>
</Info>
<Config>
<Key>NativeSettings_Language</Key>
<Value>cs</Value>
</Config>
</WebBox>

12.3.2 Parameters and Values for the File custom.xml

Parameter
NetworkSettings_DhcpUsage1
NetworkSettings_DnsIpAddr1
150 SCCPXT-E7-BA-en-58
Explanation
Required element of the XML file. You must enter
the name and the version for your settings between
the version tags. This information is displayed in the
header of the user interface.
Here, you can set the parameters and their corre-
sponding values (see Section 12.3.2, page 150).
Here, you can set the time period in ms which must
expire before the communication unit will shut
down after the UPS of the inverter has signaled a
failure of the supply voltage to the communication
unit. The value must be greater than or equal to
2,500. This setting is immediately adopted once
the file is uploaded.
Explanation
Activates DHCP for LAN2. With the
True value, all other settings of the IP
addresses for LAN2 will be ignored.
Sets the first IPv4 address of the DNS
server for LAN2
SMA Solar Technology AG
Values Default val-
ues
True False
False
‒ ‒
0.0.0.0
A valid IPv4
address
User Manual