SMA Solar Technology AG
10 Decommissioning
10.1 Disassembling the Inverter
1. Open the inverter as described in section 7.2 "Opening the Inverter" (page 55).
2. Remove all cables from the inverter.
3. Close the inverter with the 6 screws and the
corresponding conical spring washers.
4. Remove the fan guards from both sides.
5. Remove the 2 screws on the left and right side of the
inverter that attach it to the wall bracket.
6. Disconnect the anti‑theft protection, if applicable.
Installation Manual
SMC46-60A-IA-IEN120471
Decommissioning
75