Cleaning The Handle Covers - SMA SMC 5000A Installation Manual

SMA
Technologie AG

11.1.3 Cleaning the handle covers

There are handle covers on either side of the Sunny Mini Central. The Sunny Mini Cen-
tral sucks air in from underneath via the fan and blows it out again on the upper sides.
For optimum hat dissipation within the device, you have to clean both handle covers.
Proceed as follows when cleaning the handle covers:
Step Instructions
1
The handle covers of the Sunny Mini Central
are to be found on the sides of the housing.
Place your fingers in the space between the
top of the housing and the handle covers
and gently pull the handle covers out of their
bracket.
2
Clean the handle covers with a soft brush, a paint brush or compressed air.
3 Insert the handle covers back into the Sunny Mini Central. The handle covers
can only be inserted on the right or left side of the Sunny Mini Central respec-
tively. "links/left" or "rechts/right" is printed on the inside of the handle covers
to help you identify the sides.
4
Installation Guide
The handle covers must not be removed permanently, because
otherwise the device is not protected against the entrance of
insects! Should the handle covers break, new ones can be ordered
from SMA (contact: see page 103).
Maintenance and cleaning
SMC50A_60A-11:SE3706 Page 77