11 Operating Data and Parameters
11.1.3.3 Status Values
Name
Fehler
Status
11.1.4 Zone Monitoring
11.1.4.1 Instantaneous Values
Name
DcMs.Amp[x]
ActTol[x]
11.1.4.2 Status Values
Name
Mode
Error
StatusZone[x]
120
SCCPXT-E7-BA-en-58
Description
Error detected by the Sunny String-Monitor
Operating status of the Sunny String-Monitor
Description
DC current at input x
Deviation of maximum standardized current in percent at input x
Values
---
Waiting
Operation
Disturbance
Error
---
ConfigFail
ZoneValueLow
ZoneValueFail
CalibrationFail
DevNotReachable
---
ZoneValueLow
ZoneValueFail
Description
Initialization
Zone Monitoring is activated, but the minimum current for
the evaluation is not yet reached.
Zone Monitoring is activated and the minimum current for
the evaluation is reached.
Disturbance
Error
There is no warning, disturbance or error to display.
Current inputs are not configured. At least two inputs
have to be configured.
At least one input has an input current which is too low.
For at least one input, the input current is no longer mea-
sured (input current ≤ 2 A)
Calibration has failed.
I/O module has not answered for at least 30 seconds.
No error
The input has an input current which is too low.
For the input, the input current is no longer measured (in-
put current ≤ 2 A).
SMA Solar Technology AG
User Manual