Bandai Namco Time Crisis 5 Operation Manual page 98

8B. Service
- Must be performed by a technician -
(5) Replacing the switching regulator (5 V)
● In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
Phillips pan head screws
(with flat and spring washers)
(M3 x 8)
98
electronic circuits, be sure to turn off the power switch before starting this task.
● PC boards are vulnerable to static electricity. If a person handles a PC board while charged
with static electricity, the parts on the PC board may be damaged. Before handling a PC
board, discharge the static electricity from your body by touching the surface of grounded
metal.
1
Turn off the power switch.
(See P-81 "8A-8 Turning the Power Switch On".)
2
Remove the regulator base.
(See P-97 "(4) Removing and installing the regulator base".)
3
Remove the four Phillips pan head screws (with flat and spring washers) (M3 x 8) and
replace the switching regulator (5 V).
4 To install, perform the procedure in reverse.
● When installing, be sure to securely lock the connectors.
● When installing, take care not to allow the connectors and harnesses to get caught.
● When removing, be careful not to damage the PC board and other parts.
WARNING
Switching regulator (5 V)
Regulator base