Bandai Namco Time Crisis 5 Operation Manual page 125

3 Disconnect the connector and replace the sensor unit.
Sensor unit
4 To install, perform the procedure in reverse.
5
After replacing the sensor unit, be sure to check the operations. (See P-49 "7-7-5 Input/Output
Test of Switches (I/O TEST)", P-47 "(1) SIGHT CALIBRATION (Gun Sight Calibration Screen)".)
● When installing, be sure to securely lock the connectors.
● When installing, take care not to allow the connectors and harnesses to get caught.
8B. Service
- Must be performed by a technician -
Sensor unit
1
2
3
4
5
6
7
8A
8B
9
10
11
125