Bandai Namco Time Crisis 5 Operation Manual page 93

(2) Replacing the game PC board
* This section explains the procedure applicable to the monitor tower (L) assembly. Repeat the procedure
for the monitor tower (R) assembly.
● In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
electronic circuits, be sure to turn off the power switch before starting this task.
1
Turn off the power switch.
(See P-81 "8A-8 Turning the Power Switch On".)
2
Remove the maintenance door.
(See P-92 "(1) Removing and installing the maintenance doors".)
3
Remove the seven connectors, power connector, USB dongle, and LAN connector.
4
Remove the two Phillips pan head screws (with flat and spring washers) (M5 x 10) and pull
out the game PC board together with the PC base.
Game PC board
Connectors
USB dongle
Connectors
PC base
- Must be performed by a technician -
WARNING
Power connector
8B. Service
LAN connector
Phillips pan head screws
(with flat and spring washers)
(M5 x 10)
1
2
3
4
5
6
7
8A
8B
9
10
11
93