2-6 Gun Assembly - Bandai Namco Time Crisis 5 Operation Manual

8B-2-6 Gun Assembly
Symptom
· Bullets do not correctly · The gun sight is not aligned
hit their targets.
· The gun muzzle is dirty.
· The filter is dirty.
· The muzzle is too close to the
· There is an adjacent machine that
· A connector is disconnected.
· The LED board is malfunctioning.
· The sensor unit is malfunctioning.
· The CPU board is malfunctioning.
· The USIO (T) PC board is
· The gun harness 2 is
· The trigger does not · A connector is disconnected.
· A micro switch is broken.
function.
· The USIO (T) PC board is
· The gun harness 2 is
· The gun does not vibrate. · A connector is disconnected.
· The vibration unit is malfunctioning. · Replace the vibration unit.
· The USIO (T) PC board is
· The gun drive PC board is
Cause
correctly.
screen.
uses the same detection system.
malfunctioning.
malfunctioning.
malfunctioning.
malfunctioning.
malfunctioning.
malfunctioning.
- Must be performed by a technician -
Solution
· Adjust the gun sight.
· Clean it.
· Clean it.
· Instruct players to play the game while
maintaining a distance of 60 cm or
more between the screen and the
muzzle.
· Keep a distance of 1 m or more
between the cabinets.
· Connect the connector.
· Replace the LED board.
· Replace the sensor unit.
· Replace the CPU board.
· Replace the USIO (T) PC board.
· Replace the gun harness 2.
· Connect the connector.
· Replace the micro switch.
· Replace the USIO (T) PC board.
· Replace the gun harness 2.
· Connect the connector.
· Replace the USIO (T) PC board.
· Replace the gun drive PC board.
8B. Service
1
2
Reference
3
section
4
P-47
5
P-61
P-62
6
7
–
8A
P-47 8B
P-122
9
P-117
10
P-124
P-119
11
P-103
P-126
P-130
P-130
P-103
P-126
P-127
P-127
P-103
P-119
89