Assembling The Gun Tower Assembly - Bandai Namco Time Crisis 5 Operation Manual

8A-3 Assembling the Gun Tower Assembly
1
Move the gun tower (L) assembly close to the front side of the monitor tower (L) assembly
and connect the two connectors. Push the two connectors into the gun tower (L) assembly,
and fix them together while exercising care not to pinch the harness.
2 Use four Phillips flange socket bolts (M6 x 12) to temporarily secure the gun tower (L)
assembly. (These bolts are fully tightened after level adjuster adjustment.)
Phillips flange socket bolts (M6 x 12)
Monitor tower (L) assembly
3
Attach the pedal brackets (A) and (B) to the pedal assembly using four flange socket bolts
(M6 x 12) as shown in the figure. Ensure that the orientation and positioning of the pedal
brackets (A) and (B) are correct.
4
Connect the connector and store it into the gun tower (L) assembly.
Gun tower (L) assembly (front)
(Slot)
Flange socket bolt (M6 x 12)
Connectors
Gun tower (L) assembly
Connector
Pedal bracket (A)
- Must be performed by a technician -
Phillips flange socket bolts
(M6 x 12)
Pedal bracket (B)
Flange socket bolts (M6 x 12)
(Slot)
Pedal assembly
8A. Service
1
2
3
4
5
6
7
8A
8B
9
10
11
75