Bandai Namco Time Crisis 5 Operation Manual page 100

8B. Service
- Must be performed by a technician -
(7) Replacing the switching regulator (24 V)
● In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
100
electronic circuits, be sure to turn off the power switch before starting this task.
● PC boards are vulnerable to static electricity. If a person handles a PC board while charged
with static electricity, the parts on the PC board may be damaged. Before handling a PC
board, discharge the static electricity from your body by touching the surface of grounded
metal.
1
Turn off the power switch.
(See P-81 "8A-8 Turning the Power Switch On".)
2
Remove the regulator base.
(See P-97 "(4) Removing and installing the regulator base".)
3
Remove the five Phillips pan head screws (with flat and spring washers) (M3 x 8) and
replace the switching regulator (24 V).
4 To install, perform the procedure in reverse.
Switching regulator (5 V)
● When installing, be sure to securely lock the connectors.
● When installing, take care not to allow the connectors and harnesses to get caught.
● When removing, be careful not to damage the PC board and other parts.
WARNING
Phillips pan head screws (with flat and spring washers) (M3 x 8)
Regulator base