Bandai Namco Time Crisis 5 Operation Manual page 108

8B. Service
- Must be performed by a technician -
108
4
Ensure that the positioning of the ohmic sensor is correct. Try to install the ohmic sensor so
that its capacitor faces the outside of the monitor.
5
To install, perform the procedure in reverse.
● When installing, be sure to securely lock the connectors.
● When installing, take care not to allow the connectors and harnesses to get caught.
● When removing, be careful not to damage the PC board and other parts.
Ohmic sensor
Capacitor (must face the outside of the monitor)
Connectors
Phillips pan head screws
(with flat and spring washers)
(M3 x 20)