4-4 Gun Tower (L) And (R) Assemblies - Bandai Namco Time Crisis 5 Operation Manual

8B-4-4 Gun Tower (L) and (R) Assemblies
(1) Replacing the CPU board
* This section explains the procedure applicable to the gun tower (L) assembly. Repeat the procedure for
the gun tower (R) assembly.
● In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
electronic circuits, be sure to turn off the power switch before starting this task.
● PC boards are vulnerable to static electricity. If a person handles a PC board while charged
with static electricity, the parts on the PC board may be damaged. Before handling a PC
board, discharge the static electricity from your body by touching the surface of grounded
metal.
1 Turn off the power switch.
(See P-81 "8A-8 Turning the Power Switch On".)
2
Remove the 11 Torx bolts (M5 x 12) and remove the gun tower cover (L).
- Must be performed by a technician -
WARNING
8B. Service
Torx bolts (M5 x 12)
Gun tower cover (L)
Torx bolts
(M5 x 12)
1
2
3
4
5
6
7
8A
8B
9
10
11
117