Loading To And Unloading From A Vehicle - Bandai Namco Time Crisis 5 Operation Manual

6. Moving and Transportation

6-2-2 Loading to and Unloading from a Vehicle

● When moving the machine, disassemble it into the monitor tower (L) and (R) assemblies, coin box
● When manually transporting the machine, be sure to disassemble it into the monitor tower (L) and (R)
● When using a forklift to transport the monitor tower (L) and (R) assemblies, observe the following. Failure
● The gun tower (L) and (R) assemblies are not to designed to be transported by a forklift. If they are
30
assembly, signboard (L), (R), and (C) assemblies, gun tower (L) and (R) assemblies, and pedal assemblies.
An attempt to manually transport the machine without disassembling it may result in an accident or
injury. (See P-63 "8A. Installation and Assembly".)
assemblies, coin box assembly, signboard (L), (R), and (C) assemblies, gun tower (L) and (R) assemblies,
and pedal assemblies. Attempting to manually transport the machine without disassembling it may result
in an accident or injury. (See P-26 "5-2 Required Dimensions for the Delivery Route (Such as Doors and
Corridors)" and P-63 "8A. Installation and Assembly".)
When manually transporting the machine to load it into or from a vehicle, follow the instructions in P-28
"6-2-1 Manual Transportation (Such as Carrying on Stairs)".
to observe the following may result in an accident, such as the machine tipping over.
• Be sure to insert the forks into the specified positions.
• Make sure that the machine is balanced properly during transportation.
transported by a forklift, the forklift may tip over or cause an accident. Do not use a forklift when moving
or transporting them.
● Do not subject the machine to impact when moving it down from an elevated position.
● Move the machine carefully to avoid damaging it.
● Be sure to raise the level adjusters of the monitor tower (L) and (R) assemblies, and
gun tower (L) and (R) assemblies to their highest level. (See P-77 "8A-4 Level Adjuster
Adjustment".)
● Exercise care not to allow the gun assembly to drop.
● Exercise care not to allow the gun assembly tube to get caught and pulled.
WARNING
Monitor tower (R) assembly (back)
Fork sticker