Bandai Namco Time Crisis 5 Operation Manual page 95

5 Remove the four countersunk washer nuts (M6) and remove the game PC board.
Game PC board
Countersunk washer nuts (M6)
PC mounting bracket A
6
Turn the game PC board upside down. Remove the four Phillips pan head screws (with flat
and spring washers) (M4 x 8) and remove the PC mounting brackets A and B.
Phillips pan head screws
(with flat and spring washers)
(M4 x 8)
7 To install, perform the procedure in reverse.
● When installing, connect the connectors in accordance with the harness tags.
● When installing, be sure to securely lock the connectors.
● When installing, take care not to allow the connectors and harnesses to get caught.
● After replacing, be sure to check the operations and settings. (See P-42 "7-7 Test Mode".)
- Must be performed by a technician -
Countersunk washer nuts (M6)
PC base
PC mounting bracket A
Game PC board
PC mounting bracket B
8B. Service
PC mounting bracket B
95
1
2
3
4
5
6
7
8A
8B
9
10
11