8A. Service
- Must be performed by a technician -
10
Remove the two Torx bolts (M5 x 12). Use the service key to unlock and remove the
maintenance door from the monitor tower (L) assembly. Repeat the same procedure to
remove the maintenance door from the monitor tower (R) assembly.
Service key
Torx bolts (M5 x 12)
Maintenance door
Monitor tower (L) assembly
11
Remove the two Torx bolts (M5 x 12) from the rear side of the monitor tower (L) assembly
and loosen the two Torx bolts to remove the back panel.
Torx bolts (M5 x 12)
Back panel
Torx bolts (M5 x 12)
Monitor tower (L) assembly
68