Bandai Namco Time Crisis 5 Operation Manual page 135

3 Raise the pedal cover on the photosensor to be replaced.
4
Disconnect the connector, remove the Phillips pan head screw (M4 x 10), and replace the
photosensor.
Pedal assembly
5 Repeat the procedure to replace the photosensor on the other side.
6
To install, perform the procedure in reverse.
7 After replacing the photosensor, be sure to check the operations. (See P-49 "7-7-5 Input/
Output Test of Switches (I/O TEST)".)
● When installing, be sure to securely lock the connectors.
● When installing, take care not to allow the connectors and harnesses to get caught.
- Must be performed by a technician -
Connector
Phillips pan head screw (M4 x 10)
Photosensor
8B. Service
Pedal cover
1
2
3
4
5
6
7
8A
8B
9
10
11
135