Bandai Namco Time Crisis 5 Operation Manual page 132

8B. Service
- Must be performed by a technician -
(6) Replacing the gun tube
● In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
Phillips pan head screw
(with flat and spring washers)
(M4 x 6)
Ground terminal
132
electronic circuits, be sure to turn off the power switch before starting this task.
1 Turn off the power switch.
(See P-81 "8A-8 Turning the Power Switch On".)
2
Remove the gun assembly.
(See P-122 "(1) Replacing the gun assembly".)
3
Remove the gun body (R) and pull out the vibration unit.
(See 4 in P-127 "(4) Replacing the rotary solenoid".)
4 Disconnect the three connectors and two Faston terminals, remove the Phillips pan head
screw (with flat and spring washers) (M4 x 6), and disconnect the ground terminal.
WARNING
Faston terminals
Connectors