Bandai Namco Time Crisis 5 Operation Manual page 121

3 Remove the LED cover.
4
Disconnect the connector, open the six clamps, then remove and replace the tape LED (red).
Gun tower (L) assembly
Clamp
Notch
Clamps
Tape LED (red)
Connector
Notch
5 To install, perform the procedure in reverse.
● When installing, be sure to securely lock the connectors.
● When installing, take care not to allow the connectors and harnesses to get caught.
● The color of the LED is red on the L side and blue on the R side.
8B. Service
- Must be performed by a technician -
Torx bolt (M5 x 12)
Tower LED light acrylic panel (L)
1
2
3
4
5
6
7
8A
8B
9
10
11
121